1-800-626-7030 |
|
 Fluid sealing products for industry |
 |
Construction:
Multi-lok braid. Features: Unlike other PTFE fluorocarbon filament packing, SEPCO pre-lubricates the yarns to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. Equipment: Any equipment where braided packing is commonly used. Recommended For: The most severe services. All oxidizers and corrosives with one exception; molton alkali metals. Limitations: Shaft speeds to 1202 FPM; temperatures to 600 F/ 318 C; pH range 0-14. Remarks: No glazing at higher speed applications, inert, virtually indestructable lower coefficient of friction, thermal resistance to 500 F / 260 C; and high compression strength. |
|---|
 |
Construction:
Multi-lok braid. Features: Pure PTFE filament lubricated with a proprietary lubricant that satisfies FDA requirements. Equipment: Any equipment where braided packing is commonly used. Recommended For: Applications in the food processing industry or where an FDA material is required. Limitations: Shaft speeds to 1202 FPM; temperatures to 500 F/ 260 C; pH range 0-14. |
|---|
 |
Construction:
Multi-lok braid. Features:A new improved PTFE yarn for high speed applications Equipment: Rotating pumps and agitators with peripheral shaft speeds too fast for other PTFE packing. Recommended For:All chemicals and corrosives. Limitations: Addition of new lubricants reduces the inertness slightly. Shaft speeds to 1885 FPM; temperatures to 500 F / 260 C, pH range 0-14. Remarks: Use this specially treated PTFE packing where other PTFE filament glazed or hardened because of frictional heat from high speeds and thermal expansion. |
|---|
 |
Construction:
Multi-lok braid. Features: Fibers are treated with a PTFE dispersion which fills and seals all interstices in the packing fibers. After braiding, a PTFE coating is applied and the packing is forced air dried. This packing will not wick. Equipment: Valves, exansion joints, and static applications.. Recommended For:All severe chemicals and corrosives. Limitations: Temperatures to 500 F / 260 C, pH range 0-14. For static applications Remarks: Excellent valve stem packing for all chemicals and corrosives; inert to all fluids except for molton alkali metals. |
|---|
 |
Construction:
Multi-lok braid. Features: PTFE fibers with PTFE suspension. Contains no organic lubricant and is approved for oxygen service. Equipment: Valves, exansion joints, and static applications.. Recommended For:All services where an organic lubricant cannot be used. Limitations: Temperatures to 50 F / 260 C, pH range 0-14. |
|---|
